sensors" 또는 ”artificial muscle"로 불리어진다. 전형적인 IPMC는 두께가 200㎛ 정도의 ionic polymer와 ionic polymer 양면에 두께 5~10㎛의 금속 전극 층으로 구성되어 있다. 그리고 고분자 전해질의 내부에는 내부에 존재하는 음이온기와 전하 균형을 이루면서 H+, Li+, Na+ 등의 counter ion이 존재하게 된다. 물과 같은 용
Sensor, Switch로 나누어진다. 이름만 들으면 바로 알아챌 수 있는 부품들이다. 상당히 간단한 구조로 되어 있다는 것을 알 수 있다. 그러나 심플한 구조로 이루어져 있음에도 불구하고 상당히 많은 물리적 원리가 적용되어 있다. 열역학적 원리와 중력을 이용해서 물을 이동시키고, 전기에너지를 열에너지
composite system (Chitosan-laponite) for electrochemical sensing based on glucose oxidase
Qiaofang Shi, Qingbo Li, Dan Shan, Quan Fan, Huaiguo (XueCollege of Chemistry & Chemical Engineering, Yangzhou University, Yangzhou 225002, China / Elsevier, 2008)
필름을 기반의 효소전극 성능 향상
점착성, 생체적합성, 기계적 성능, 효소고정 능력 향상
효소의
Summary
We are going to develop an IoT-based body sensor which could collect the daily health information of people, make initial diagnoses and monitor patients continuously. For individuals, the body sensor is a private doctor. The information afterwards can be referred by medical institutions to do further treatments and used by insurance company to offer personalized products. Besides, if it c
sample(L=30 mm)을
끼우고, 냉각수를 흘려 보내준다.
2) Power switch 가 on 상태에서 Heater power controller를 돌려서 측정값을
읽는다.
3) 측정값을 기록하기 전에 충분히 시간이 흘러 상태가 안정되면 9개 지점의 sensor의
온도를 기록한다.
4) Heater power를 달리 하면서 3)의 과정을 반복한다.
여러 가지이다. 초등학교와 중학교 교사들은 standard composition 노트를 주로 사용한다. (흰색과 검은색이 섞인 대리석 무늬의 노트) 다음 부분에서 설명되어진 4학년을 위한 것을 보면, 학생들은 각 활동을 위한 자신의 과학 노트에 페이지를 시작하도록 요구받는다. 그 구조는 그림 4.1에 보여주고 있다.
thickness limit
Grafting from
‘‘Grafting-from’’ involves an in situ polymerization of an initiator functionalized surface with monomer.
Advantage
-can produce polymer brushes of high grafting density
-control over film thickness and composition
Limitation
-initiator surface coverage
-initiator efficiency
-rate of diffusion of monomer to active polymerization sites.
1. 개요
전도는 열전달의 한 방법으로 열이 매질(원자 또는 분자)을 통해 전달되고 그 매질의 이동이 없는 경우이며 주로 고체에서 일어난다.
2. 목적
단순바에서 선형적인 열전도를 측정하여 Fourier`s law가 성립함을 증명해보고 복합바(composite bar)에서의 열전도를 통해 벽면의 전열개수를 구해본다.